รบกวนท่าน NAX หน่อยครับพอดีจะอัพรอม Aurora II

ไม่เข้าใจครงนี้นะครับ มันให้ระวังอะไรบ้าง

Warning:
* The new firmware partition format problem because there will only be mtp and ptp mode, no mass storage mode, such as care Do not brush
* Brush brick risk if you do not have the ability to make repair card, please do not continue
* Brush ago Please keep adequate power, low battery erase flash bricking risk exists
* Brush opportunity to clean flash file, make a backup before you brush

Brush Method:
* Please carefully read the description of the patch package
* The zip copy the firmware to the root directory tf card
* The patch package unzip all the files into the root directory tf card
* Turned off, press and hold the power button and volume down boot until the boot screen
* The next step will be to enter the erase flash memory, the time required is longer, please be patient to wait until the recovery screen
* Executed first wipe operation, and then select apply update from EXT, first update the firmware, and then update the corresponding own version of the patch
* After the restart to complete
* Please note that after completion Brush tf card on aml_autoscript delete files mistakenly cleared to avoid re-flash
* After downloading, please read the compressed package to the readme file
* Firmware, and has brushed off before the patch, just copy the patch package inside the zip file to the tf card and uImage_recovery direct upgrade, without wipe

Brush Method คืออะไร แล้วมันมีข้อระวังอะไรสำหรับ รอมตัวนี้